Настройка BIOS Setup Сообщения
Сообщения
В данной категории собраны сообщения, которые могут отображаться на мониторе в случае возникновения ошибок во время процедуры самодиагностики (POST) при включении ПК, а также другие сообщения.
1 8042 Gate A20 Error
2 Address Line Short
3 BAD Cache Memory – Do not Enable
4 Bad PNP Serial ID Cheksum
5 BIOS ROM Checksum Error - System Halted
6 BIOS Update For Installed CPU Failed
7 BIOS Version
8 BootSector Write
9 Bus Time-Out NMI At Slot XXX
10 CH-2 Timer Error
11 Checking NVRAM
12 CMOS Battery Failed
13 CMOS Checksum Bad
14 CMOS Date/Time Not Set
15 CMOS Display Type
16 CMOS Memory Size Mismatch
17 CMOS System Option Not Set
18 CPU Has Been Changed, Or CPU Ratio Changed Fail
19 Disk Boot Failure, Insert System Disk And Press Enter
20 Diskette Boot Failure
21 Diskette Drive A/B Error
22 Diskette Drivers Or Types Mismatch Error – Run Setup
23 DMA #1 Error
24 DMA #2 Error
25 DMA Bus Time Out
26 DMA Error
27 Drive X: Error
28 ECC Error
29 EISA CMOS In operational
30 EISA Configuration Checksum Error
31 EISA Configuration Is Not Complete
32 Error Initializing Hard Drive Controller
33 ERROR – Can’t Write ESCD
34 Expansion Board Not Ready At Slot XXX
35 Extended RAM Failed At Offset: XXXX
36 Floppy Disk Controller Resource Conflict
37 Floppy Disk(s) fail (40)
38 HARD DISK initializing. Please wait a moment
39 Hard Disk(s) Fail (08)
40 Hard Disk(s) Fail (10)
41 I/O Card Parity Error at XXXX
42 INTR #1 Error
43 INTR #2 Error
44 Invalid Boot Diskette
45 Invalid Drive Specification
46 Invalid System Configuration Data
47 Invalid System Configuration Data – Run Configuration Utility Press..
48 KB/Interface Error
49 Keyboard Is Locked Out – Unlock the Key
50 Memory Address Error at XXXX
51 Memory Optimal Error
52 Memory Parity Error at XXXX
53 Missing Operation System
54 NVRAM Checksum Error
55 OC fail, please enter setup to change OC Fail setting
56 Off Board Parity Error
57 Offending Address Not Found
58 Onboard PCI VGA Not Configured For Bus Master
59 Override Enabled – Default loaded
60 Parallel Port Resource Conflict
61 Parity Error
62 PCI I/O Port Conflict
63 PCI IRQ Port Conflict
64 PCI Memory Conflict
65 Press A Key To Reboot
66 Press ESC to skip Memory Test
67 Press F1 To Disable NMI, F2 To Reboot
68 Press TAB to show POST Screen
69 Primary Boot Device Not Found
70 Primary IDE channel no conductor cable installed
71 Primary Master Hard Disk Fail
72 Primary Master Hard Disk S.M.A.R.T Status Bad
73 Primary Slave Hard Disk Fail
74 Primary/Secondary IDE Controller Resource Conflict
75 Processor Speed
76 Processor Type
77 PS/2 Keyboard not found
78 PS/2 Mouse not found
79 Secondary Master Hard Disk Fail
80 Secondary Master Hard Disk S.M.A.R.T Status Bad
81 Secondary Slave Hard Disk Fail
82 Serial Port 1 Resource Conflict
83 Serial Port 2 Resource Conflict
84 Should Be Empty But EISA Board Found
85 Should Have EISA Board But Not Found
86 Slot Not Empty
87 Software Port NMI
88 SPD Toler Error Serial Presence Detect (SPD)
89 Static Device Resource Conflict
90 System Device Resource Conflict
91 System halted, (Ctrl-Alt-Del) to reboot
92 System RAM Failed At Offset: XXXX
93 Total Memory
94 Unknown PCI Error
95 VIRUS: Continue (Y/N)?
96 Warning! CPU has Been changed or Overclock fail
97 Wrong Board In Slot
98 Your computer case had been opened. Pres SPACE to continue.

Главное меню

Настройка БИОС

Оцените сайт

Оцените сайт
 

Поиск